gadgetPool.degadgetPool.de Ihr Konto  Warenkorb  Kasse  
  Startseite » Katalog » Hobby / Allgemeine Elektronik Ihr Konto  |  Warenkorb  |  Kasse   
----Kategorien----

Yacht Electronik
Yacht Electronik->
 (19)



Hobby / Allgemeine Elektronik
Hobby / Allgemeine Elektronik->
 (22)



  

Displays
Displays
 (4)



  

Microcontroller
Microcontroller
 (6)



  

Programmiergeräte & Werkzeuge
Programmiergeräte & Werkzeuge
 (2)



  

Löttechnik
Löttechnik
 (10)



Reinigungs- und Pflegemittel
Reinigungs- und Pflegemittel->
 (18)



TUX-art
TUX-art



Hersteller
Neue Produkte Zeige mehr
Montagerahmen für Seatalk Bridge
Montagerahmen für Seatalk Bridge
14.28EUR
Schnellsuche
 
Verwenden Sie Stichworte, um ein Produkt zu finden.
erweiterte Suche
Informationen
Liefer- und
 Versandkosten

Privatsphäre
 und Datenschutz

Impressum und AGB's
Kontakt
Kategorien Hobby / Allgemeine Elektronik
Displays
Displays
Microcontroller
Microcontroller
Programmiergeräte & Werkzeuge
Programmiergeräte & Werkzeuge
Löttechnik
Löttechnik
Aktuelle Produkte im Mai
Reflow Kit (groß)
Reflow Kit (groß)
129.00EUR
Lötzinn (Warenprobe) bleifrei Kester K100LD
Lötzinn (Warenprobe) bleifrei Kester K100LD
0.00EUR
EA DIP204-4HNLED
EA DIP204-4HNLED
29.75EUR
AVR-STAMP 128
AVR-STAMP 128
35.90EUR
ATMega32-16PU
ATMega32-16PU
8.20EUR
ATMega16-16AU
ATMega16-16AU
5.95EUR
ATMega128-16AU
ATMega128-16AU
14.99EUR
VS2013-DW (20x4 Zeichen)
VS2013-DW (20x4 Zeichen)
20.23EUR
VS122329-DW (122x32 Pixel Grafikdisplay )
VS122329-DW (122x32 Pixel Grafikdisplay )
22.61EUR
Warenkorb Zeige mehr
0 Produkte
Bestseller
01.MAX 6675
02.JTAG-ICE für AVR Prozessoren (USB Schnittstelle 3,3..5 V )
03.EA DIP204-4HNLED
04.JTAG-ICE für AVR Prozessoren (Serielle Schnittstelle)
05.Reflow Kit (groß)
06.Reflow Controller
07.Lötzinn (Warenprobe) bleifrei Kester K100LD
08.AtMega128 adapter (SMD auf bedrahtet )
09.Flussmittelstift (Fluxpen) Kester 952-D6
10.Grafik LCD Display Optrex DMF5008
Angebote Zeige mehr
SeaTalk NMEA Bridge mit Display und AluStyle Gehäuse
SeaTalk NMEA Bridge mit Display und AluStyle Gehäuse
199.00EUR
148.75EUR
Bewertungen Zeige mehr
Es liegen noch keine Bewertungen vor
Sprachen
English Deutsch
Währungen
Forum
NMEA to WiFi Adapter (network udp & tcp)

Hello, I have developed an NMEAtoWiFi adapter. By using this adapter you can connect your notebook for plotting and navigation and additional devices like tablet or smartphone to your existing NMEA source at the same time. No need for cable splitting... The device can act as an accespoint or can be connected to an exsiting WiFi network on your boat. I have successfully tested connection to NV ChartNavigator and OpenCPN on notebook and android smartphones. Combined NMEA data (AIS & GPS) came from the Lowrance LINK-8 and were transmitted by TCP network to the NV ChartNavigator. On the android tablet and android smartphone I used the UDP connection to OpenCPN. regards prillo

---------


Hi Frank, I uploaded the new versions of the config tool v1.14 and firmware V2.8. Everything works perfectly well, especially the "true wind" data are now being sent over NMEA ports. Thank you very much for this great work. Best rregards Pierre

---------


Ok Frank, thank you very much for this update. As you saw it on the shema of my installation on board, the multiplexer is very solicited too. So it is with pleasure that I will report to you on the operation of the multiplexer. Best regards. Pierre

---------

New Firmware V2.4 and new config tool V1.13

Hi Pierre - and everybody else how might be interested. I just uploaded a new package to our download section. It contains * latest Firmware V2.4 * new config tool V1.13 - With this firmware and config tool, you can configure to which port you could like to have sent true-wind data calculated by the multiplexer. - This firmware also contains some bugfixes for problems we found over the last weeks. A user from the far north :) really help us a lot to find and fix problems that could arise when the multiplexer is operated at its limits. He used all 4 Ports + SeaTalk, some ports set to 38400 Baud and others with just 4800 Baud. In this situation it could come to data corruption due to buffer overflow. - Since I don't have a NMEA wind instrument for testing, maybe you could test it give a short feedback, so that I know if it works as expected. Thank you and best regards Frank

---------


Ok thank you very much Frank. I will now stop scratching my head :lol: And I look forward to updating the firmware. My best regards. Pierre

---------


Hallo again you also asked :
Another question : could you tell me if Seatalk sentences coming up from my tiller (pilot RAYMARINE ST2000+) are processed by the multiplexer in order to have a remote control on the pilot from the chart plotter (PC using OPENCPN).
The multiplexer does receive compass data from the ST2000. I know that from the time when I tested my first SeaTalk Nmea Bridge with a ST2000+ Regarding the "remote control" - What you can do is make a waypoint ( or a route with several waypoints ) in OpenCPN and send that waypoint to the ST2000+. It will than steer the boat to that waypoint. OpenCPN sends waypoint-name, distance, direction and cross track error via NMEA to the multiplexer and the multiplexer forwards that data to the seatalk bus. The manual says :
In Track mode, the tiller pilot maintains a track between waypoints created on a navigation system. The tiller pilot computes any course changes to keep your boat on track, automatically compensating for tidal streams and leeway. To operate in Track mode, the tiller pilot must receive cross track error information from either: Bring the boat to within 0.1 nm of track. 2. Press auto. 3. Press -10 and +10 together to enter Track mode. 4. An alarm will sound and the display will alternate between: • the bearing to waypoint, and • the direction the boat will turn to take up the new track
That should work. I never tried it with a ST2000+ myself, but I tried it with other autopilots, and I'm pretty sure it will work with the ST2000+ as well. Of course you have to make sure, that "sending data to seatalk" is enabled. ( See config tool ) Best regards Frank

---------


Perfect !! That's the kind of problem that would have been relay hard to find from here. I'm glad you could sove it. Best regards Frank

---------

Re: Wifi connection

Hello Pierre,
...... Everything works fine except that I can not get the true wind using Wifi while I get it using the USB plug.
I just checked my source codes - and you are absolutely right. Currently the muxer calculates true wind and sends it to the USB port only. I guess that comes from the time when I implemented that true-wind calculation for one user who asked for it, and I simply forgot to finish that new function properly. Most users only needed true wind on the board computer, which is connected via USB port. I will add sending true wind to the NMEA-Out ports as well. I just need a couple of days to implement and test it. Thank you for reporting that. Best regards Frank

---------

Wifi connection (New Firmware V2.4, new Functions & Bug

Hi Frank, As you probably remember, I use your gadgetpool multiplexer on my boat. It works perfectly well. I use OpenCpn on a PC as a chart plotter and I decided this year to connect the PC using Wifi on to the multiplexer. So I added a Wifi access point to my installation. http://www.usriot.com/p/serial-wifi-ethernet-converter/ Everything works fine except that I can not get the true wind using Wifi while I get it using the USB plug. Do you have an idea on why I have the true wind via the USB and not via Wifi ? NMEA sentences seems to be correct : $IIMWV,112.50,T,005.30,N,A*3A $IIMWV,112.5,R,005.3,N,A*3C The relative wind is displayed both by USB and Wifi. Connections of the whole stuff is as follow : https://www.dropbox.com/s/4revs1chbyqzn5l/Liberdade_reseau_3.pdf?dl=0 Best regards Pierre

---------

Problème USB link

Hi Frank, I found the problem ! On the St wind, on one Seatalk connector the 12V from the instrument was out or order. I take the 12V on an another connector and everything is ok! Thank's for help. Regards. Patrick

---------


Copyright © 2017 gadgetPool.de
Powered by osCommerce